Products
factory customized Folic Acid - Isopropenyl acetate – MingXing
factory customized Folic Acid - Isopropenyl acetate – MingXing Detail:
Quality index:
Appearance:Colorless Transparent Liquid
Content: ≥ 99%
Melting point – 93oC
Boiling point: 94oC (lit.)
The density was 0.92
Vapor pressure 23 HPA (20oC)
Refractive index N20 / D 1.401 (lit.)
The flash point is less than 66oF
Instruction:
It is mainly used to make rum flavors and fruit flavors. It can also be used as extraction solvent. In medicine, it is mainly used as the refining solvent for a series of products. For organic synthesis. Used as analytical reagent.
1. Leakage emergency treatment
Cut off the fire. Wear gas masks and chemical protective clothing. Do not directly contact with the leakage, and stop the leakage under the condition of ensuring safety. Spray mist can reduce evaporation. It is absorbed by sand, vermiculite or other inert materials, and then transported to an open place for burial, evaporation or incineration. If there is a large amount of leakage, it should be collected and recycled or disposed innocuously.
2. Protective measures
Respiratory protection: when the concentration in the air exceeds the standard, you should wear a gas mask.
Eye protection: wear chemical safety glasses.
Body protection: wear anti-static work clothes.
Hand protection: wear protective gloves.
Others: smoking is strictly prohibited at the work site. After work, shower and change clothes. Pay special attention to eye and respiratory protection.
3. First aid measures
Skin contact: take off contaminated clothes and rinse thoroughly with soapy water and water.
Eye contact: immediately open the upper and lower eyelids and rinse with flowing water for 15 minutes. See a doctor.
Inhalation: quickly leave the scene to fresh air. Give oxygen when you have difficulty breathing. When breathing stops, artificial respiration should be performed immediately. See a doctor.
Ingestion: if taken by mistake, drink enough warm water, induce vomiting and see a doctor.
Fire fighting methods: fog water, foam, carbon dioxide, dry powder and sand.
Hazard characteristics: in case of open fire, high heat or contact with oxidant, there is a risk of combustion and explosion. In case of high heat, polymerization reaction may occur, resulting in a large number of exothermic phenomena, resulting in vessel rupture and explosion accidents. Its vapor is heavier than air, it can spread to a considerable distance at a lower place, and it will lead to Reburning in case of open fire.
Packing: 180kg / drum.
Annual capacity: 1000 tons / year
Product detail pictures:
Related Product Guide:
We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for factory customized Folic Acid - Isopropenyl acetate – MingXing , The product will supply to all over the world, such as: Austria, Australia, Washington, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Jean Ascher from Thailand - 2018.09.23 18:44
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Abigail from Chicago - 2017.01.11 17:15
